Deep Security 11 has reached end of support. Use the version selector (above) to see more recent versions of the Help Center.

Add a VMware vCenter

You can import a VMware vCenter into Deep Security Manager and then protect its virtual machines either agentlessly, with an agent, or in combined mode. (For information on those options, see Choose agentless vs. combined mode protection.)

If you are using Deep Security in FIPS mode, follow the instructions in Add a vCenter when Deep Security Manager is in FIPS mode instead.

You cannot import a vCenter that is using vShield Manager. For information on migrating from vShield Manager to a supported VMware product, see Install or upgrade Deep Security.

1. In Deep Security Manager, go to Computers > Add > Add VMware vCenter.
2. Enter the vCenter server information:
   • Enter the vCenter server's IP address (or host name if DNS is configured and able to resolve FQDNs to IP addresses).
   • Enter the port number to connect to the vCenter (443 by default).
   • Enter the user name and password of a vCenter user account. This account must conform to the specifications in the table below. This user is required to synchronize the VM inventory between vCenter and Deep Security Manager.

     Protection method	NSX Type	vCenter user account specifications
     agentless or combined mode	VMware NSX Data Center for vSphere (NSX-V)	The vCenter user account must have the following two roles: Enterprise Administrator role assigned in NSX Manager. For information on assigning roles in NSX-V Manager, see this VMware article. Administrator role assigned at the data center level in vCenter.
     agent only	No NSX-V integration	The vCenter user account must have the vCenter Read Only role (or another role that has equal or greater privileges) at the data center level.

   Applying the Read Only or Administrator role at the Hosts and Clusters or Virtual Machine level in vCenter causes synchronization problems.

   • Click Next.
3. Accept the vCenter TLS (SSL) certificate.
4. Enter your NSX information as described below if you plan on using agentless or combined mode protection. Otherwise, click Next to skip this step.
   • Enter the NSX Manager IP address (or host name if DNS is configured and able to resolve FQDNs to IP addresses).
   • Enter the port number to connect to NSX Manager (443 by default).
   • Enter the user name and password of an NSX or vCenter user account. This account must conform to the specifications in the table below. This user is required to synchronize NSX security policies and security groups with Deep Security Manager.

     NSX Type

     User account specifications

     VMware NSX Data Center for vSphere (NSX-V)

     The user account must be: the NSX built-in administrator account (which has full permissions) Or a vCenter user account with the following two roles: Enterprise Administrator role assigned in NSX Manager. For information on assigning roles in NSX-V Manager, see this VMware article. Administrator role assigned at the data center level in vCenter. (Applying this role at the cluster level causes errors.)

   • Click Next.
5. If prompted, accept the NSX Manager's TLS (SSL) certificate.
6. Review the vCenter information and click Finish.
7. The VMware vCenter has been successfully added message will be displayed. Click Close.The vCenter will appear on the Computers page.

   If you select Create an Event Based task to automatically activate VMs added to protected NSX Security Groups in this vCenter when adding the vCenter, Deep Security Manager will create two event-based tasks. One activates VMs when protection is added and the other deactivates VMs when protection is removed. For more information, see Automated policy management in NSX environments.

If you provided your NSX information as described above, Deep Security Manager registers the Deep Security service within NSX Manager. The registration permits the deployment of the Deep Security service to the ESXi servers.

In a large environment with more than 3000 machines reporting to a vCenter Server, this process may take 20 to 30 minutes to complete. You can check the vCenter's Recent Task section to verify if there are activities running.

Deep Security Manager will maintain real-time synchronization with this VMware vCenter to keep the information displayed in Deep Security Manager (number of VMs, their status, etc.) up to date.

Add a vCenter when Deep Security Manager is in FIPS mode

To add a vCenter when Deep Security Manager is in FIPS mode:

1. Import the vCenter and NSX Manager TLS (SSL) certificates into Deep Security Manager before adding the vCenter to the manager. See Manage trusted certificates.
2. Follow the steps in Add a VMware vCenter to add vCenter. The steps are exactly the same, except that in FIPS mode you will see a Trusted Certificate section on the vCenter page. Click Test Connection to check whether the vCenter's SSL certificate has been imported successfully into Deep Security Manager. If there are no errors, click Next and continue on through the wizard.

In a large environment with more than 3000 machines reporting to a vCenter Server, this process may take 20 to 30 minutes to complete. You can check the vCenter's Recent Task section to verify if there are activities running.

Deep Security Manager will maintain real-time synchronization with this VMware vCenter to keep the information displayed in Deep Security Manager (number of VMs, their status, etc.) up to date.